VALEX 2012
Download Data Sheet
VALEX-2012
FEATURES
Main feature
• Elastic fixing of rails with or without pad.
• System that allows an easy lateral adjustment of the rail.
• Easy maintenance.
• The elastomer nose increases the tolerances rail support structure, reduces the stress of the connections, allows a better fixing of the rail.
• The fastening system has been used for years throughout the world in the most demanding conditions with great success.
COMPONENTS
• clip with vulcanized rubber nose. 1)
APPLICATIONS
The fastening system Valex 2012 for direct fixing has been studied specifically for crane rails but it can be used with good results also with train and light rails.
It is very rugged, reliable fastening system of contained dimensions.
It can be used with any type of crane independently of the driving system.
| Dimensions [mm] | E | F | G | H | L | L1 | L2 | M | N | O | P | Weight [g] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VALEX 2012-31-6 | - | - | - | 17 | - | - | - | - | - | - | - | 210 |
| VALEX 2012-31-10 | - | - | - | 13 | - | - | - | - | - | - | - | 210 |
| VALEX 2012-31-13 | - | - | - | 10 | - | - | - | - | - | - | - | 210 |
| Rail Type | A [mm] | B [mm] | C [mm] | Weight [kg/m] | Without Pad | With Pad |
|---|---|---|---|---|---|---|
| A 45 | 45 | 55 | 125 | 22,1 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| A 55 | 55 | 65 | 150 | 31,8 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| A 65 | 65 | 75 | 175 | 43,1 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| A 75 | 75 | 85 | 200 | 56,2 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| A 100 | 100 | 95 | 200 | 74,3 | VALEX 2012-31-10 | - |
| A 120 | 120 | 105 | 220 | 100 | VALEX 2012-31-10 | - |
| A 150 | 150 | 150 | 220 | 150,3 | VALEX 2012-31-13 | - |
| CR 104 | 63,5 | 127 | 127 | 51,59 | VALEX 2012-31-10 | - |
| CR 105 | 65,1 | 131,8 | 131,8 | 52,09 | VALEX 2012-31-10 | - |
| CR 135 | 76,2 | 146 | 131,8 | 66,97 | VALEX 2012-31-10 | - |
| CR 171 | 101,6 | 152,4 | 152,4 | 84,83 | VALEX 2012-31-13 | - |
| MRS 87 A | 101,6 | 152,4 | 152,4 | 86,8 | VALEX 2012-31-13 | - |
| CR 175 | 102,4 | 152,4 | 152,4 | 86,8 | VALEX 2012-31-13 | - |
| MRS 125 | 120 | 180 | 180 | 125 | - | - |
| S 7 | 25 | 65 | 50 | 6,75 | - | - |
| S 10 | 32 | 70 | 58 | 10 | - | - |
| S 14 | 38 | 80 | 70 | 14 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| S 18 | 43 | 93 | 82 | 18,3 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| S 20 | 44 | 100 | 82 | 19,8 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| S 24 | 53 | 115 | 90 | 24,43 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| 25 kg/m | 50 | 115 | 90 | 25 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| S 26 (AFNOR 26) | 50 | 110 | 100 | 26,27 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| 27 E1 (27 UNI) | 50 | 120 | 95 | 27,06 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| AFNOR 30 | 56 | 125,5 | 106 | 29,98 | VALEX 2012-31-06 | VALEX 2012-31-10 |
| 30 E1 (S 30) | 60,3 | 108 | 108 | 30,13 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| 33 E1 (S 33) | 58 | 134 | 105 | 33,47 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| 36 E1 (36 UNI) | 60 | 130 | 100 | 36,26 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| 40 E1 (S 41-R14) | 67 | 138 | 125 | 40,95 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| 46 E4 (46 UNI) | 65 | 145 | 135 | 46,9 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| 49 E1 (S 49) | 67 | 149 | 125 | 49,39 | VALEX 2012-31-10 | VALEX 2012-31-13 |
| 50 E5 (50 UNI) | 67 | 148 | 135 | 49,9 | VALEX 2012-31-06 | VALEX 2012-31-13 |
| 54 E1 (UIC 54) | 70 | 159 | 140 | 54,77 | VALEX 2012-31-10 | - |
| 60 E1 (UIC 60) | 72 | 172 | 150 | 60,21 | VALEX 2012-31-10 | - |
GENERAL INSTRUCTIONS
The selection of the fastening system,either for crane rails or train or light (Decauville) rails is a rather important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of the mechanical components.
• Damage to the supporting base.
• Damage to the fastening system.
VALEX fastening systems have been developed through experience of over more than 100 years of activity
The VALEX fastening systems offer a practically unlimited selection of alternatives, which alloews for the most effective and efficient performance in nearly every possible situation.
ASSEMBLING INSTRUCTIONS
• Line up the rails.
• Place the clip in contact with the rails.
• Place the washer and insert the screw.
• Proceed to a light tightening.
• Control line up of the rail and the correct contact between the rails and the clips.
• Complete tightening
TECHNICAL SPECIFICATIONS
• Lateral adjustment 5 mm
• Side load 30 kN
• Torque tightening 75 Nm
• Bolt M12 8.8 gr – NOT INCLUDED
• Steel quality S355JR
FIXING DETAILS
System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.