VALEX D820-D820M

Clip Valex D820-D820M
Clip Valex D820-D820M

Download Data Sheet


• System made up of one clip.
• Easy and simple installation.
• Easy and simple manutenance.

• VALEX D820

Developed for Decauville rails, VALEX D and D820 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Clip Valex D820-D820M
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX D82072045-19--12355545230
VALEX D820-M-2045-19--12355545230
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX D820/M-
A 55556515031,8VALEX D820/M-
A 65657517543,1--
A 75758520056,2--
A 1001009520074,3--
A 120120105220100--
A 150150150220150,3--
CR 10463,512712751,59--
CR 10565,1131,8131,852,09--
CR 13576,2146131,866,97--
CR 171101,6152,4152,484,83--
MRS 87 A101,6152,4152,486,8--
CR 175102,4152,4152,486,8--
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014VALEX D820/M-
S 1843938218,3VALEX D820/M-
S 20441008219,8VALEX D820/M-
S 24531159024,43VALEX D820/M-
25 kg/m501159025VALEX D820/M-
S 26 (AFNOR 26)5011010026,27VALEX D820/M-
27 E1 (27 UNI)501209527,06VALEX D820/M-
AFNOR 3056125,510629,98VALEX D820/M-
30 E1 (S 30)60,310810830,13VALEX D820/M-
33 E1 (S 33)5813410533,47--
36 E1 (36 UNI)6013010036,26VALEX D820/M-
40 E1 (S 41-R14)6713812540,95--
46 E4 (46 UNI)6514513546,9VALEX D820/M-
49 E1 (S 49)6714912549,39--
50 E5 (50 UNI)6714813549,9--
54 E1 (UIC 54)7015914054,77--
60 E1 (UIC 60)7217215060,21--


The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening

• Side load 70 kN
• Torque tightening 220Nm
• Bolt M(vedi tabella) 8.8 gr – NOT INCLUDED
• Steel quality S275JR
• Side load 65 kN
• Torque tightening 220 Nm
• Bolt M(vedi tabella) 8.8 gr – NOT INCLUDED
• Steel quality S275JR



System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.