VALEX 5020

Clip Valex 5020
Clip Valex 5020

Download Data Sheet


• Elastic fastening system for rails with or without pad.
• System made up of two interlocked elements, which allow easy clip lateral adjustment.
• System components locked together by a special bolt.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing.
• System lower element easily weldable to rail support.

1 Flanged nut M20
2 Upper clip vulcanized rubber nose.
3 Special screw M 20
4 Weldable lower clip

VALEX 5020

Developed for crane rails, VALEX 5020 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Clip Valex 5020
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 5020-38-920385419-------1350
VALEX 5020-38-1620385412-------1340
VALEX 5020-38-192038549-------1340
VALEX 5020-42-1324425719-------1470
VALEX 5020-42-2024425712-------1460
VALEX 5020-42-232442579-------1460
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without padWith Pad
A 45455512522,1--
A 55556515031,8--
A 65657517543,1-VALEX 5020-42-13
A 75758520056,2VALEX 5020-38-09VALEX 5020-42-13
A 1001009520074,3VALEX 5020-38-09VALEX 5020-42-13
A 120120105220100VALEX 5020-38-09VALEX 5020-38-16
A 150150150220150,3VALEX 5020-42-13VALEX 5020-42-20
CR 10463,512712751,59VALEX 5020-42-13VALEX 5020-38-19
CR 10565,1131,8131,852,09VALEX 5020-38-09VALEX 5020-38-16
CR 13576,2146131,866,97VALEX 5020-38-09VALEX 5020-38-16
CR 171101,6152,4152,484,83VALEX 5020-42-13VALEX 5020-42-20
MRS 87 A101,6152,4152,486,8VALEX 5020-42-13VALEX 5020-42-20
CR 175102,4152,4152,486,8VALEX 5020-42-13VALEX 5020-38-19
MRS 125120180180125VALEX 5020-42-20-
S 72565506,75--
S 1032705810--
S 1438807014--
S 1843938218,3--
S 20441008219,8--
S 24531159024,43--
25 kg/m501159025--
S 26 (AFNOR 26)5011010026,27--
27 E1 (27 UNI)501209527,06--
AFNOR 3056125,510629,98--
30 E1 (S 30)60,310810830,13-VALEX 5020-42-13
33 E1 (S 33)5813410533,47-VALEX 5020-42-13
36 E1 (36 UNI)6013010036,26VALEX 5020-38-09VALEX 5020-38-16
40 E1 (S 41-R14)6713812540,95-VALEX 5020-42-13
46 E4 (46 UNI)6514513546,9VALEX 5020-38-09VALEX 5020-42-13
49 E1 (S 49)6714912549,39VALEX 5020-38-09VALEX 5020-42-13
50 E5 (50 UNI)6714813549,9VALEX 5020-38-09VALEX 5020-42-13
54 E1 (UIC 54)7015914054,77VALEX 5020-38-09VALEX 5020-42-13
60 E1 (UIC 60)7217215060,21VALEX 5020-38-09VALEX 5020-38-16

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity

VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place the lower clip facing the rail according to the drawing at the distance indicated in the technical card.
• Weld the two perpendicular sides and the diagonal side of the lower clip opposite to the rail with either electrode or rode.
• Insert the screw in the lower clip.
• Place upper clip and the flanged nut.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening

• AWS A5.1-04 E7018-1
• EN ISO 2560-A E42 4 B42 H5
• CE EN 13479

• AWS A5.18 ER 705-6: SG3
• EN ISO 1668 W 4Si1: SG3

• Lateral adjustment 14 mm
• Side load 140 [kN] • Torque tightening 275 [Nm] • Welding seam thickness 10 mm-3 mm (see technical drawing below)
• Special Bolt M 20 8.8 gr
• Steel quality S355JR


VALEX 5020
VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.