VALEX 2124
Download Data Sheet
VALEX-2124
FEATURES
• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing
COMPONENTS PROVIDED
• Clip with vulcanized rubber nose.
• Special washers.
APPLICATIONS
Developed for crane rails, VALEX 2124 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.
| Dimensions [mm] | E | F | G | H | L | L1 | L2 | M | N | O | P | Weight [g] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VALEX 2124-42-9 | - | - | - | 23 | - | - | - | - | - | - | - | 2020 |
| VALEX 2124-42-13 | - | - | - | 19 | - | - | - | - | - | - | - | 2010 |
| VALEX 2124-42-18 | - | - | - | 14 | - | - | - | - | - | - | - | 1990 |
| VALEX 2124-42-23 | - | - | - | 9 | - | - | - | - | - | - | - | 1970 |
| Rail Type | A [mm] | B [mm] | C [mm] | Weight [kg/m] | Without Pad | With Pad |
|---|---|---|---|---|---|---|
| A 45 | 45 | 55 | 125 | 22,1 | - | - |
| A 55 | 55 | 65 | 150 | 31,8 | - | - |
| A 65 | 65 | 75 | 175 | 43,1 | - | VALEX 2124-42-13 |
| A 75 | 75 | 85 | 200 | 56,2 | VALEX 2124-42-09 | VALEX 2124-42-13 |
| A 100 | 100 | 95 | 200 | 74,3 | VALEX 2124-42-09 | VALEX 2124-42-13 |
| A 120 | 120 | 105 | 220 | 100 | VALEX 2124-42-09 | VALEX 2124-42-18 |
| A 150 | 150 | 150 | 220 | 150,3 | VALEX 2124-42-13 | VALEX 2124-42-18 |
| CR 104 | 63,5 | 127 | 127 | 51,59 | VALEX 2124-42-13 | VALEX 2124-42-18 |
| CR 105 | 65,1 | 131,8 | 131,8 | 52,09 | VALEX 2124-42-09 | VALEX 2124-42-13 |
| CR 135 | 76,2 | 146 | 131,8 | 66,97 | VALEX 2124-42-09 | VALEX 2124-42-18 |
| CR 171 | 101,6 | 152,4 | 152,4 | 84,83 | VALEX 2124-42-13 | VALEX 2124-42-18 |
| MRS 87 A | 101,6 | 152,4 | 152,4 | 86,8 | VALEX 2124-42-13 | VALEX 2124-42-18 |
| CR 175 | 102,4 | 152,4 | 152,4 | 86,8 | VALEX 2124-42-09 | VALEX 2124-42-18 |
| MRS 125 | 120 | 180 | 180 | 125 | VALEX 2124-42-18 | - |
| S 7 | 25 | 65 | 50 | 6,75 | - | - |
| S 10 | 32 | 70 | 58 | 10 | - | - |
| S 14 | 38 | 80 | 70 | 14 | - | - |
| S 18 | 43 | 93 | 82 | 18,3 | - | VALEX 2124-42-09 |
| S 20 | 44 | 100 | 82 | 19,8 | - | VALEX 2124-42-13 |
| S 24 | 53 | 115 | 90 | 24,43 | - | VALEX 2124-42-13 |
| 25 kg/m | 50 | 115 | 90 | 25 | - | VALEX 2124-42-09 |
| S 26 (AFNOR 26) | 50 | 110 | 100 | 26,27 | - | VALEX 2124-42-09 |
| 27 E1 (27 UNI) | 50 | 120 | 95 | 27,06 | - | VALEX 2124-42-09 |
| AFNOR 30 | 56 | 125,5 | 106 | 29,98 | - | VALEX 2124-42-13 |
| 30 E1 (S 30) | 60,3 | 108 | 108 | 30,13 | - | VALEX 2124-42-09 |
| 33 E1 (S 33) | 58 | 134 | 105 | 33,47 | - | VALEX 2124-42-13 |
| 36 E1 (36 UNI) | 60 | 130 | 100 | 36,26 | - | VALEX 2124-42-13 |
| 40 E1 (S 41-R14) | 67 | 138 | 125 | 40,95 | - | VALEX 2124-42-13 |
| 46 E4 (46 UNI) | 65 | 145 | 135 | 46,9 | VALEX 2124-42-09 | VALEX 2124-42-13 |
| 49 E1 (S 49) | 67 | 149 | 125 | 49,39 | VALEX 2124-42-09 | VALEX 2124-42-13 |
| 50 E5 (50 UNI) | 67 | 148 | 135 | 49,9 | - | VALEX 2124-42-13 |
| 54 E1 (UIC 54) | 70 | 159 | 140 | 54,77 | VALEX 2124-42-09 | VALEX 2124-42-13 |
| 60 E1 (UIC 60) | 72 | 172 | 150 | 60,21 | VALEX 2124-42-09 | VALEX 2124-42-13 |
GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system
VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.
ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screws and special washers.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening
TECHNICAL SPECIFICATIONS
• Lateral adjustment 15 mm
• Side load 290 kN
• Torque tightening 550 Nm
• Bolt M24 8.8 gr – NOT INCLUDED
• Steel quality S355JR
WELDING DETAILS
System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.