VALEX 2012

clip valex2012
clip valex2012

Download Data Sheet


Main feature

• Elastic fixing of rails with or without pad.
• System that allows an easy lateral adjustment of the rail.
• Easy maintenance.
• The elastomer nose increases the tolerances rail support structure, reduces the stress of the connections, allows a better fixing of the rail.
• The fastening system has been used for years throughout the world in the most demanding conditions with great success.

• clip with vulcanized rubber nose. 1)


The fastening system Valex 2012 for direct fixing has been studied specifically for crane rails but it can be used with good results also with train and light rails.
It is very rugged, reliable fastening system of contained dimensions.
It can be used with any type of crane independently of the driving system.

valex 2012
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 2012-31-6---17-------210
VALEX 2012-31-10---13-------210
VALEX 2012-31-13---10-------210
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX 2012-31-06VALEX 2012-31-10
A 55556515031,8VALEX 2012-31-06VALEX 2012-31-13
A 65657517543,1VALEX 2012-31-06VALEX 2012-31-13
A 75758520056,2VALEX 2012-31-06VALEX 2012-31-13
A 1001009520074,3VALEX 2012-31-10-
A 120120105220100VALEX 2012-31-10-
A 150150150220150,3VALEX 2012-31-13-
CR 10463,512712751,59VALEX 2012-31-10-
CR 10565,1131,8131,852,09VALEX 2012-31-10-
CR 13576,2146131,866,97VALEX 2012-31-10-
CR 171101,6152,4152,484,83VALEX 2012-31-13-
MRS 87 A101,6152,4152,486,8VALEX 2012-31-13-
CR 175102,4152,4152,486,8VALEX 2012-31-13-
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014VALEX 2012-31-06VALEX 2012-31-10
S 1843938218,3VALEX 2012-31-06VALEX 2012-31-10
S 20441008219,8VALEX 2012-31-06VALEX 2012-31-10
S 24531159024,43VALEX 2012-31-06VALEX 2012-31-10
25 kg/m501159025VALEX 2012-31-06VALEX 2012-31-10
S 26 (AFNOR 26)5011010026,27VALEX 2012-31-06VALEX 2012-31-10
27 E1 (27 UNI)501209527,06VALEX 2012-31-06VALEX 2012-31-10
AFNOR 3056125,510629,98VALEX 2012-31-06VALEX 2012-31-10
30 E1 (S 30)60,310810830,13VALEX 2012-31-06VALEX 2012-31-13
33 E1 (S 33)5813410533,47VALEX 2012-31-06VALEX 2012-31-13
36 E1 (36 UNI)6013010036,26VALEX 2012-31-06VALEX 2012-31-13
40 E1 (S 41-R14)6713812540,95VALEX 2012-31-06VALEX 2012-31-13
46 E4 (46 UNI)6514513546,9VALEX 2012-31-06VALEX 2012-31-13
49 E1 (S 49)6714912549,39VALEX 2012-31-10VALEX 2012-31-13
50 E5 (50 UNI)6714813549,9VALEX 2012-31-06VALEX 2012-31-13
54 E1 (UIC 54)7015914054,77VALEX 2012-31-10-
60 E1 (UIC 60)7217215060,21VALEX 2012-31-10-

The selection of the fastening system,either for crane rails or train or light (Decauville) rails is a rather important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of the mechanical components.
• Damage to the supporting base.
• Damage to the fastening system.

VALEX fastening systems have been developed through experience of over more than 100 years of activity
The VALEX fastening systems offer a practically unlimited selection of alternatives, which alloews for the most effective and efficient performance in nearly every possible situation.

• Line up the rails.
• Place the clip in contact with the rails.
• Place the washer and insert the screw.
• Proceed to a light tightening.
• Control line up of the rail and the correct contact between the rails and the clips.
• Complete tightening

• Lateral adjustment 5 mm
• Side load 30 kN
• Torque tightening 75 Nm
• Bolt M12 8.8 gr – NOT INCLUDED
• Steel quality S355JR


valex 2012
VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.