VALEX 4025

Clip Valex 4025
Clip Valex 4025

Download Data Sheet

valex-4025

FEATURES

  • System made up of one clip one bolt and nut.
  • Possibility of lateral adjustment.
  • Easy and simple installation.
  • Easy and simple maintenance.

COMPONENTS

  •  CLIP
4025

APPLICATIONS
VALEX 4025 is a direct fastening system specifically developed for crane rails, however, it can also be used for train and light (Decauville) rails, with very positive results.
A very rugged, reliable system of contained dimensions, which can be used with every type of crane, independently of the driving system.

Clip Valex 4025
Dimensions [mm] E F G H L L1 L2 M N O P Weight [g]
VALEX 4025 25 55 23 40 25 60 100 80 1050

Valex fastening systems can also be used for several other rail profiles, not listed.
A complete range of compatible rails is available on request.

VALEX 1004
RAIL TYPE A [mm] B [mm] C [mm] Weight [Kg/m] WITH PAD WITHOUT PAD
A 45 45,00 55,00 125,00 22,10
A 55 55,00 65,00 150,00 31,80
A 65 65,00 75,00 175,00 43,10 VALEX 4025
A 75 75,00 85,00 200,00 56,20 VALEX 4025
A 100 100,00 95,00 200,00 74,30 VALEX 4025
A 120 120,00 105,00 220,00 100,00
A 150 150,00 150,00 220,00 150,30
CR 104 63,50 127,00 127,00 51,59
CR 105 65,10 131,80 131,80 52,09
CR 135 76,20 146,00 131,80 66,97
CR 171 101,60 152,40 152,40 84,83
MRS 87 A 101,60 152,40 152,40 86,80
CR 175 102,40 152,40 152,40 86,80
MRS 125 120,00 180,00 180,00 125,00
S 7 25,00 65,00 50,00 6,75
S 10 32,00 70,00 58,00 10,00
S 14 38,00 80,00 70,00 14,00
S 18 43,00 93,00 82,00 18,30
S 20 44,00 100,00 82,00 19,80
S 24 53,00 115,00 90,00 24,43
25 Kg/m 50,00 115,00 90,00 25,00
S 26 (AFNOR 26) 50,00 110,00 100,00 26,27 VALEX 4025
27 E1 (27 UNI) 50,00 120,00 95,00 27,06
AFNOR 30 56,00 125,50 106,00 29,98 VALEX 4025
30 E1 (S 30) 60,30 108,00 108,00 30,13 VALEX 4025
33 E1 (S 33) 58,00 134,00 105,00 33,47 VALEX 4025
36 E1 (36 UNI) 60,00 130,00 100,00 36,26
40 E1 (S41-R14) 67,00 138,00 125,00 40,95 VALEX 4025
46 E4 (46 UNI) 65,00 145,00 135,00 46,90 VALEX 4025
49 E1 (S 49) 67,00 149,00 125,00 49,39
50 ES (50 UNI) 67,00 148,00 135,00 49,90 VALEX 4025
54 E1 (UIC 54) 70,00 159,00 140,00 54,77
60 E1 (UIC 60) 72,00 172,00 150,00 60,21 VALEX 4025

GENERAL INSTRUCTIONS
The selection of the fastening system, either for crane, train, or light (Decauville) rails, is a critically important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:

  • Slow down or shut down of the production process
  • Excessive and, or irregular wear of the rails
  • Damage of the mechanical components of the crane
  • Damage of the supporting base
  • Damage of the fastening systems

Valex fastening systems were developed through experience accumulated over more than 100 years of activity.
Valex fastening systems offer a wide range of alternatives, which would perform in the most effective and efficient way in every possible situation.

INSTALLATION INSTRUCTIONS

  • Carefully align the rails.
  • Place the clips in direct contact with the rails.
  • Position the washer and insert the screw.
  • Perform an initial light tightening.
  • Complete the tightening process according to recommended torque.

TECHNICAL SPECIFICATIONS

  • Side load 70 KN
  • Lateral adjustament 10 mm
  •  Torque tightening 320 Nm
  •  Bolt 8.8 gr M20 – NOT INCLUDED
  •  Steel quality S275JR

FIXING DETAILS

valex 4025

VALENTE S.p.A. aims to provide maximum assistance and total customer satisfaction, guarantees the origin and quality of its products, and supplies any reasonably requested documentation.

VALENTE S.p.A. reserves the right to modify the information contained in the technical data sheet without notice and disclaims any responsibility for any inaccuracies or changes in the reported data.