VALEX 5116

Clip Valex 5116
Clip Valex 5116

Download Data Sheet

valex-5116

FEATURES

  • Elastic fastening system for crane rails with or without pad.
  • System made up of two elements locked together with a bolt and a flanged nut, which allow for an easy lateral adjustment to the rail.
  • The elastomer nose increases the tolerance between the rail and the supporting structure, reduces the connection stress and the wear of the crane mechanic components.
  • The lower part of the clip can easily be welded to the supporting structure without access difficulties.

COMPONENTS

  • Flanged nuts M16.
  • Upper clip vulcanized rubber nose.
  • Special screws M16.
  • Weldable lower clip.
VALEX 5116

APPLICATIONS
VALEX 5116 is an indirect fastening system specifically developed for crane rails, however, it can also be used for train and light (Decauville) rails, with very positive results.
A very rugged, reliable system of contained dimensions, which can be used with every type of crane, independently of the driving system.

Clip Valex 5116
Dimensions [mm] E F G H L L1 L2 M N O P Weight [g]
VALEX 5116-32-6 14 32 45 20 1300
VALEX 5116-32-13 14 32 45 13 1280
VALEX 5116-32-16 14 32 45 10 1270
VALEX 5116-34-8 16 34 45 20 1380
VALEX 5116-34-15 16 34 45 13 1360
VALEX 5116-34-18 16 34 45 10 1350

Valex fastening systems can also be used for several other rail profiles, not listed.
A complete range of compatible rails is available on request.

VALEX 1004
RAIL TYPE A [mm] B [mm] C [mm] Weight [Kg/m] WITH PAD WITHOUT PAD
A 45 45,00 55,00 125,00 22,10 VALEX 5116-32-13 VALEX 5116-32-06
A 55 55,00 65,00 150,00 31,80 VALEX 5116-32-13 VALEX 5116-32-06
A 65 65,00 75,00 175,00 43,10 VALEX 5116-32-13 VALEX 5116-32-06
A 75 75,00 85,00 200,00 56,20 VALEX 5116-34-15 VALEX 5116-34-08
A 100 100,00 95,00 200,00 74,30 VALEX 5116-34-15 VALEX 5116-34-08
A 120 120,00 105,00 220,00 100,00 VALEX 5116-34-18 VALEX 5116-32-13
A 150 150,00 150,00 220,00 150,30 VALEX 5116-34-18 VALEX 5116-32-13
CR 104 63,50 127,00 127,00 51,59 VALEX 5116-34-18 VALEX 5116-34-15
CR 105 65,10 131,80 131,80 52,09 VALEX 5116-34-15 VALEX 5116-34-08
CR 135 76,20 146,00 131,80 66,97 VALEX 5116-34-18 VALEX 5116-32-13
CR 171 101,60 152,40 152,40 84,83 VALEX 5116-34-15
MRS 87 A 101,60 152,40 152,40 86,80 VALEX 5116-34-15
CR 175 102,40 152,40 152,40 86,80 VALEX 5116-34-18 VALEX 5116-32-13
MRS 125 120,00 180,00 180,00 125,00
S 7 25,00 65,00 50,00 6,75
S 10 32,00 70,00 58,00 10,00
S 14 38,00 80,00 70,00 14,00
S 18 43,00 93,00 82,00 18,30 VALEX 5116-32-13 VALEX 5116-32-06
S 20 44,00 100,00 82,00 19,80 VALEX 5116-32-13 VALEX 5116-32-06
S 24 53,00 115,00 90,00 24,43 VALEX 5116-32-13 VALEX 5116-32-06
25 Kg/m 50,00 115,00 90,00 25,00 VALEX 5116-32-13 VALEX 5116-32-06
S 26 (AFNOR 26) 50,00 110,00 100,00 26,27 VALEX 5116-32-13 VALEX 5116-32-06
27 E1 (27 UNI) 50,00 120,00 95,00 27,06 VALEX 5116-32-13 VALEX 5116-32-06
AFNOR 30 56,00 125,50 106,00 29,98 VALEX 5116-32-13 VALEX 5116-32-06
30 E1 (S 30) 60,30 108,00 108,00 30,13 VALEX 5116-32-13 VALEX 5116-32-06
33 E1 (S 33) 58,00 134,00 105,00 33,47 VALEX 5116-32-13 VALEX 5116-32-06
36 E1 (36 UNI) 60,00 130,00 100,00 36,26 VALEX 5116-34-15 VALEX 5116-34-08
40 E1 (S41-R14) 67,00 138,00 125,00 40,95 VALEX 5116-32-13 VALEX 5116-34-08
46 E4 (46 UNI) 65,00 145,00 135,00 46,90 VALEX 5116-34-15 VALEX 5116-34-08
49 E1 (S 49) 67,00 149,00 125,00 49,39 VALEX 5116-34-15 VALEX 5116-34-08
50 ES (50 UNI) 67,00 148,00 135,00 49,90 VALEX 5116-34-15 VALEX 5116-34-08
54 E1 (UIC 54) 70,00 159,00 140,00 54,77 VALEX 5116-34-15 VALEX 5116-34-08
60 E1 (UIC 60) 72,00 172,00 150,00 60,21 VALEX 5116-34-15 VALEX 5116-34-08

GENERAL INSTRUCTIONS
The selection of the fastening system, either for crane, train, or light (Decauville) rails, is a critically important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:

  • Slow down or shut down of the production process
  • Excessive and, or irregular wear of the rails
  • Damage of the mechanical components of the crane
  • Damage of the supporting base
  • Damage of the fastening systems

Valex fastening systems were developed through experience accumulated over more than 100 years of activity.
Valex fastening systems offer a wide range of alternatives, which would perform in the most effective and efficient way in every possible situation.

INSTALLATION INSTRUCTIONS

  • Place the lower clip facing the rail according to the drawing at the distance indicated in the technical cards.
  • Weld the two perpendicular sides of the lower clip and the horizontal side opposite to the rail with either electrode or rod.
  • Insert the screw in the lower clip.
  • Place the upper clip and the flanged nut.
  • Proceed with a light tightening.
  • Control the lineup of the rails.
  • Complete tightening.

ELECTRODES

  • AWS A5.1-04 E7018-1
  • EN ISO 2560-A E42 4 B42 H5
  • CE EN 13479

ROD

  • AWS A5.18 ER 705-6: SG3
  • EN ISO 1668 W 4Si1: SG3

TECHNICAL SPECIFICATIONS

  • Side load 165 KN
  • Lateral adjustment 10 mm
  • Torque tightening 150 Nm
  • Welding seam thickness 10 mm 3 mm
    (see technical drawing below)
  • Special Bolt 8.8 gr M16
  • Steel quality S355JR

WELDING DETAILS

VALEX 5116

VALENTE S.p.A. aims to provide maximum assistance and total customer satisfaction, guarantees the origin and quality of its products, and supplies any reasonably requested documentation.

VALENTE S.p.A. reserves the right to modify the information contained in the technical data sheet without notice and disclaims any responsibility for any inaccuracies or changes in the reported data.