VALEX F036
Download Data Sheet
valex-F036
FEATURES
- System made up of one clip one bolt and nut.
- Possibility of lateral adjustment.
- Easy and simple installation.
- Easy and simple maintenance.
COMPONENTS
- CLIP
APPLICATIONS
VALEX F036 is a direct fastening system specifically developed for crane rails, however, it can also be used for train and light (Decauville) rails, with very positive results.
A very rugged, reliable system of contained dimensions, which can be used with every type of crane, independently of the driving system.
| Dimensions [mm] | E | F | G | H | L | L1 | L2 | M | N | O | P | Weight [g] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VALEX F036-20 | – | 20 | 45 | – | – | 20 | 20 | 15 | 35 | 55 | 50 | 290 |
| VALEX F036-23 | – | 20 | 45 | – | – | 23 | 23 | 15 | 35 | 55 | 50 | 270 |
| VALEX F036-25 | – | 20 | 50 | – | – | 25 | 25 | 15 | 35 | 55 | 50 | 260 |
| RAIL TYPE | A [mm] | B [mm] | C [mm] | Weight [Kg/m] | WITH PAD | WITHOUT PAD |
|---|---|---|---|---|---|---|
| A 45 | 45,00 | 55,00 | 125,00 | 22,10 | – | VALEX F036 |
| A 55 | 55,00 | 65,00 | 150,00 | 31,80 | – | VALEX F036 |
| A 65 | 65,00 | 75,00 | 175,00 | 43,10 | – | VALEX F036 |
| A 75 | 75,00 | 85,00 | 200,00 | 56,20 | – | VALEX F036 |
| A 100 | 100,00 | 95,00 | 200,00 | 74,30 | – | – |
| A 120 | 120,00 | 105,00 | 220,00 | 100,00 | – | – |
| A 150 | 150,00 | 150,00 | 220,00 | 150,30 | – | – |
| CR 104 | 63,50 | 127,00 | 127,00 | 51,59 | – | – |
| CR 105 | 65,10 | 131,80 | 131,80 | 52,09 | – | VALEX F036 |
| CR 135 | 76,20 | 146,00 | 131,80 | 66,97 | – | – |
| CR 171 | 101,60 | 152,40 | 152,40 | 84,83 | – | – |
| MRS 87 A | 101,60 | 152,40 | 152,40 | 86,80 | – | – |
| CR 175 | 102,40 | 152,40 | 152,40 | 86,80 | – | – |
| MRS 125 | 120,00 | 180,00 | 180,00 | 125,00 | – | – |
| S 7 | 25,00 | 65,00 | 50,00 | 6,75 | – | – |
| S 10 | 32,00 | 70,00 | 58,00 | 10,00 | – | – |
| S 14 | 38,00 | 80,00 | 70,00 | 14,00 | – | – |
| S 18 | 43,00 | 93,00 | 82,00 | 18,30 | – | – |
| S 20 | 44,00 | 100,00 | 82,00 | 19,80 | – | – |
| S 24 | 53,00 | 115,00 | 90,00 | 24,43 | – | – |
| 25 Kg/m | 50,00 | 115,00 | 90,00 | 25,00 | – | – |
| S 26 (AFNOR 26) | 50,00 | 110,00 | 100,00 | 26,27 | – | – |
| 27 E1 (27 UNI) | 50,00 | 120,00 | 95,00 | 27,06 | – | VALEX F036 |
| AFNOR 30 | 56,00 | 125,50 | 106,00 | 29,98 | – | VALEX F036 |
| 30 E1 (S 30) | 60,30 | 108,00 | 108,00 | 30,13 | – | VALEX F036 |
| 33 E1 (S 33) | 58,00 | 134,00 | 105,00 | 33,47 | – | VALEX F036 |
| 36 E1 (36 UNI) | 60,00 | 130,00 | 100,00 | 36,26 | – | VALEX F036 |
| 40 E1 (S41-R14) | 67,00 | 138,00 | 125,00 | 40,95 | – | VALEX F036 |
| 46 E4 (46 UNI) | 65,00 | 145,00 | 135,00 | 46,90 | – | VALEX F036 |
| 49 E1 (S 49) | 67,00 | 149,00 | 125,00 | 49,39 | – | VALEX F036 |
| 50 ES (50 UNI) | 67,00 | 148,00 | 135,00 | 49,90 | – | VALEX F036 |
| 54 E1 (UIC 54) | 70,00 | 159,00 | 140,00 | 54,77 | – | – |
| 60 E1 (UIC 60) | 72,00 | 172,00 | 150,00 | 60,21 | – | – |
Valex fastening systems can also be used for several other rail profiles, not listed.
A complete range of compatible rails is available on request.
GENERAL INSTRUCTIONS
The selection of the fastening system, either for crane, train, or light (Decauville) rails, is a critically important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
- Slow down or shut down of the production process
- Excessive and, or irregular wear of the rails
- Damage of the mechanical components of the crane
- Damage of the supporting base
- Damage of the fastening systems
Valex fastening systems were developed through experience accumulated over more than 100 years of activity.
Valex fastening systems offer a wide range of alternatives, which would perform in the most effective and efficient way in every possible situation.
INSTALLATION INSTRUCTIONS
- Place the lower clip facing the rail according to the drawing at the distance indicated in the technical cards.
- Weld the two perpendicular sides of the lower clip and the horizontal side opposite to the rail with either electrode or rod.
- Insert the screw in the lower clip.
- Place the upper clip and nut.
- Proceed with a light tightening.
- Control the lineup of the rails.
- Complete tightening.
TECHNICAL SPECIFICATIONS F036 – 20
- Side load 50 KN
- Torque tightening 220 Nm
- Bolt 8.8 gr M18 – NOT INCLUDED
- Steel quality S275JR
TECHNICAL SPECIFICATIONS F036 – 23
- Side load 70 KN
- Torque tightening 320 Nm
- Bolt 8.8 gr M20 – NOT INCLUDED
- Steel quality S275JR
TECHNICAL SPECIFICATIONS F036 – 25
- Side load 80 KN
- Torque tightening 550 Nm
- Bolt M24 8.8 gr – NOT INCLUDED
- Steel quality S275JR
FIXING DETAILS
VALENTE S.p.A. aims to provide maximum assistance and total customer satisfaction, guarantees the origin and quality of its products, and supplies any reasonably requested documentation.
VALENTE S.p.A. reserves the right to modify the information contained in the technical data sheet without notice and disclaims any responsibility for any inaccuracies or changes in the reported data.