VALEX D510-D510M

Clip Valex D510-D510M
Clip Valex D510-D510M

Download Data Sheet


• System made up of one clip.
• Easy and simple installation.
• Easy and simple manutenance.

• VALEX D510

Developed for Decauville rails, VALEX D510 and D510M direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system
Clip Valex D510-D510M
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX D51051230-15--929404070
VALEX D510-M-1230-15--929404070
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX D510/M-
A 55556515031,8--
A 65657517543,1--
A 75758520056,2--
A 1001009520074,3--
A 120120105220100--
A 150150150220150,3--
CR 10463,512712751,59--
CR 10565,1131,8131,852,09--
CR 13576,2146131,866,97--
CR 171101,6152,4152,484,83--
MRS 87 A101,6152,4152,486,8--
CR 175102,4152,4152,486,8--
MRS 125120180180125--
S 72565506,75--
S 1032705810VALEX D510/M-
S 1438807014VALEX D510/M-
S 1843938218,3VALEX D510/M-
S 20441008219,8VALEX D510/M-
S 24531159024,43VALEX D510/M-
25 kg/m501159025VALEX D510/M-
S 26 (AFNOR 26)5011010026,27VALEX D510/M-
27 E1 (27 UNI)501209527,06VALEX D510/M-
AFNOR 3056125,510629,98VALEX D510/M-
30 E1 (S 30)60,310810830,13VALEX D510/M-
33 E1 (S 33)5813410533,47--
36 E1 (36 UNI)6013010036,26--
40 E1 (S 41-R14)6713812540,95--
46 E4 (46 UNI)6514513546,9--
49 E1 (S 49)6714912549,39--
50 E5 (50 UNI)6714813549,9--
54 E1 (UIC 54)7015914054,77--
60 E1 (UIC 60)7217215060,21--


The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation

• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening
• Side load 20 kN
• Torque tightening 75Nm
• Bolt M(vedi tabella) 8.8 gr – NOT INCLUDED
• Steel quality S275JR
• Side load 18kN
• Torque tightening75 Nm
• Bolt M128.8 gr – NOT INCLUDED
• Steel quality S275JR

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.