VALEX 4025

Clip Valex 4025
Clip Valex 4025

Download Data Sheet


• System made up of one clip and bolt.
• Possibility of lateral adjustment.
• Easy and simple installation.
• Easy and simple manuntenance

• Clip


Developed for crane rails, VALEX 4025 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Clip Valex 4025
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 4025-2555--23402560100801050
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1--
A 55556515031,8--
A 65657517543,1VALEX 4025-
A 75758520056,2VALEX 4025-
A 1001009520074,3VALEX 4025-
A 120120105220100--
A 150150150220150,3--
CR 10463,512712751,59--
CR 10565,1131,8131,852,09--
CR 13576,2146131,866,97--
CR 171101,6152,4152,484,83--
MRS 87 A101,6152,4152,486,8--
CR 175102,4152,4152,486,8--
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014--
S 1843938218,3--
S 20441008219,8--
S 24531159024,43--
25 kg/m501159025--
S 26 (AFNOR 26)5011010026,27VALEX 4025-
27 E1 (27 UNI)501209527,06--
AFNOR 3056125,510629,98VALEX 4025-
30 E1 (S 30)60,310810830,13VALEX 4025-
33 E1 (S 33)5813410533,47VALEX 4025-
36 E1 (36 UNI)6013010036,26--
40 E1 (S 41-R14)6713812540,95VALEX 4025-
46 E4 (46 UNI)6514513546,9VALEX 4025-
49 E1 (S 49)6714912549,39--
50 E5 (50 UNI)6714813549,9VALEX 4025-
54 E1 (UIC 54)7015914054,77--
60 E1 (UIC 60)7217215060,21VALEX 4025-

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening

• Lateral adjustament 10 mm.
• Side load 70 [kN] • Torque tightening 320 [Nm] • Bolt M20 8.8 gr – NOT INCLUDED
• Steel quality S275JR


VALEX 4028
VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.