VALEX 2024

clip Valex 2024
clip Valex 2024

Download Data Sheet


• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing

• Clip with vulcanized rubber nose.
• Special washers.

VALEX 2024

Developed for crane rails, VALEX 2024 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

clip Valex 2024
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 2024-42-9---23-------1000
VALEX 2024-42-13---19-------990
VALEX 2024-42-18---14-------980
VALEX 2024-42-23---9-------970
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1--
A 55556515031,8--
A 65657517543,1-VALEX 2024-42-13
A 75758520056,2VALEX 2024-42-09VALEX 2024-42-13
A 1001009520074,3VALEX 2024-42-09VALEX 2024-42-13
A 120120105220100VALEX 2024-42-09VALEX 2024-42-18
A 150150150220150,3VALEX 2024-42-13VALEX 2024-42-18
CR 10463,512712751,59VALEX 2024-42-13VALEX 2024-42-18
CR 10565,1131,8131,852,09VALEX 2024-42-09VALEX 2024-42-13
CR 13576,2146131,866,97VALEX 2024-42-09VALEX 2024-42-18
CR 171101,6152,4152,484,83VALEX 2024-42-13VALEX 2024-42-18
MRS 87 A101,6152,4152,486,8VALEX 2024-42-13VALEX 2024-42-18
CR 175102,4152,4152,486,8VALEX 2024-42-09VALEX 2024-42-18
MRS 125120180180125VALEX 2024-42-18-
S 72565506,75--
S 1032705810--
S 1438807014--
S 1843938218,3-VALEX 2024-42-09
S 20441008219,8-VALEX 2024-42-13
S 24531159024,43-VALEX 2024-42-13
25 kg/m501159025-VALEX 2024-42-09
S 26 (AFNOR 26)5011010026,27-VALEX 2024-42-09
27 E1 (27 UNI)501209527,06-VALEX 2024-42-09
AFNOR 3056125,510629,98-VALEX 2024-42-13
30 E1 (S 30)60,310810830,13-VALEX 2024-42-09
33 E1 (S 33)5813410533,47-VALEX 2024-42-13
36 E1 (36 UNI)6013010036,26-VALEX 2024-42-13
40 E1 (S 41-R14)6713812540,95-VALEX 2024-42-13
46 E4 (46 UNI)6514513546,9VALEX 2024-42-09VALEX 2024-42-13
49 E1 (S 49)6714912549,39VALEX 2024-42-09VALEX 2024-42-13
50 E5 (50 UNI)6714813549,9-VALEX 2024-42-13
54 E1 (UIC 54)7015914054,77VALEX 2024-42-09VALEX 2024-42-13
60 E1 (UIC 60)7217215060,21VALEX 2024-42-09VALEX 2024-42-13

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system
.VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screw and special washer.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening

• Lateral adjustment 15 mm
• Side load 160 kN
• Torque tightening 550 Nm
• Bolt M24 8.8 gr – NOT INCLUDED
• Steel quality S355JR


VALEX 2124
VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.