VALEX 2016

clip Valex 2016
clip Valex 2016


• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing.

• Clip with vulcanized rubber nose.
• Special washer

VALEX 2016

Developed for crane rails, VALEX 2016 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

clip Valex 2016
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 2016-32-6---16-------430
VALEX 2016-32-10---12-------430
VALEX 2016-32-13---9-------420
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX 2016-32-06VALEX 2016-32-10
A 55556515031,8VALEX 2016-32-06VALEX 2016-32-13
A 65657517543,1VALEX 2016-32-06VALEX 2016-32-13
A 75758520056,2VALEX 2016-32-06VALEX 2016-32-13
A 1001009520074,3VALEX 2016-32-10-
A 120120105220100VALEX 2016-32-10-
A 150150150220150,3VALEX 2016-32-13-
CR 10463,512712751,59VALEX 2016-32-10-
CR 10565,1131,8131,852,09VALEX 2016-32-10-
CR 13576,2146131,866,97VALEX 2016-32-10-
CR 171101,6152,4152,484,83VALEX 2016-32-13-
MRS 87 A101,6152,4152,486,8VALEX 2016-32-13-
CR 175102,4152,4152,486,8VALEX 2016-32-13-
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014-VALEX 2016-32-10
S 1843938218,3VALEX 2016-32-06VALEX 2016-32-10
S 20441008219,8VALEX 2016-32-06VALEX 2016-32-10
S 24531159024,43VALEX 2016-32-06VALEX 2016-32-10
25 kg/m501159025VALEX 2016-32-06VALEX 2016-32-10
S 26 (AFNOR 26)5011010026,27VALEX 2016-32-06VALEX 2016-32-10
27 E1 (27 UNI)501209527,06VALEX 2016-32-06VALEX 2016-32-10
AFNOR 3056125,510629,98VALEX 2016-32-06VALEX 2016-32-10
30 E1 (S 30)60,310810830,13VALEX 2016-32-06VALEX 2016-32-13
33 E1 (S 33)5813410533,47VALEX 2016-32-06VALEX 2016-32-13
36 E1 (36 UNI)6013010036,26VALEX 2016-32-06VALEX 2016-32-13
40 E1 (S 41-R14)6713812540,95VALEX 2016-32-06VALEX 2016-32-13
46 E4 (46 UNI)6514513546,9VALEX 2016-32-06VALEX 2016-32-13
49 E1 (S 49)6714912549,39VALEX 2016-32-06VALEX 2016-32-13
50 E5 (50 UNI)6714813549,9VALEX 2016-32-06VALEX 2016-32-13
54 E1 (UIC 54)7015914054,77VALEX 2016-32-06VALEX 2016-32-13
60 E1 (UIC 60)7217215060,21VALEX 2016-32-10-

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screw and special washer.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening

• Lateral adjustment 10 mm
• Side load 55 kN
• Torque tightening 175 Nm
• Bolt M16 8.8 gr – NOT INCLUDED
• Steel quality S355JR


VALEX 2016
VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.