VALEX 2016

clip Valex 2016
clip Valex 2016

Download Data Sheet

valex-2016

FEATURES

  • System made up of one clip one bolt and nut.
  • Possibility of lateral adjustment.
  • Easy and simple installation.
  • Easy and simple maintenance.

COMPONENTS

  • Clip with vulcanized rubber nose.
  • Special washer.
VALEX 2016

APPLICATIONS
VALEX 2016 is a direct fastening system specifically developed for crane rails, however, it can also be used for train and light (Decauville) rails, with very positive results.
A very rugged, reliable system of contained dimensions, which can be used with every type of crane, independently of the driving system.

clip Valex 2016
Dimensions [mm] E F G H L L1 L2 M N O P Weight [g]
VALEX 2016-32-6 16 430
VALEX 2016-32-10 12 430
VALEX 2016-32-13 9 420

Valex fastening systems can also be used for several other rail profiles, not listed.
A complete range of compatible rails is available on request.

VALEX 1004
RAIL TYPE A [mm] B [mm] C [mm] Weight [Kg/m] WITH PAD WITHOUT PAD
A 45 45,00 55,00 125,00 22,10 VALEX 2016-32-10 VALEX 2016-31-06
A 55 55,00 65,00 150,00 31,80 VALEX 2016-32-13 VALEX 2016-31-06
A 65 65,00 75,00 175,00 43,10 VALEX 2016-32-13 VALEX 2016-31-06
A 75 75,00 85,00 200,00 56,20 VALEX 2016-32-13 VALEX 2016-31-06
A 100 100,00 95,00 200,00 74,30 VALEX 2016-32-10
A 120 120,00 105,00 220,00 100,00 VALEX 2016-32-10
A 150 150,00 150,00 220,00 150,30 VALEX 2016-32-13
CR 104 63,50 127,00 127,00 51,59 VALEX 2016-32-10
CR 105 65,10 131,80 131,80 52,09 VALEX 2016-32-10
CR 135 76,20 146,00 131,80 66,97 VALEX 2016-32-10
CR 171 101,60 152,40 152,40 84,83 VALEX 2016-32-13
MRS 87 A 101,60 152,40 152,40 86,80 VALEX 2016-32-13
CR 175 102,40 152,40 152,40 86,80 VALEX 2016-32-13
MRS 125 120,00 180,00 180,00 125,00
S 7 25,00 65,00 50,00 6,75
S 10 32,00 70,00 58,00 10,00
S 14 38,00 80,00 70,00 14,00 VALEX 2016-32-10
S 18 43,00 93,00 82,00 18,30 VALEX 2016-32-10 VALEX 2016-32-06
S 20 44,00 100,00 82,00 19,80 VALEX 2016-32-10 VALEX 2016-32-06
S 24 53,00 115,00 90,00 24,43 VALEX 2016-32-10 VALEX 2016-32-06
25 Kg/m 50,00 115,00 90,00 25,00 VALEX 2016-32-10 VALEX 2016-32-06
S 26 (AFNOR 26) 50,00 110,00 100,00 26,27 VALEX 2016-32-10 VALEX 2016-32-06
27 E1 (27 UNI) 50,00 120,00 95,00 27,06 VALEX 2016-32-10 VALEX 2016-32-06
AFNOR 30 56,00 125,50 106,00 29,98 VALEX 2016-32-10 VALEX 2016-32-06
30 E1 (S 30) 60,30 108,00 108,00 30,13 VALEX 2016-32-13 VALEX 2016-32-06
33 E1 (S 33) 58,00 134,00 105,00 33,47 VALEX 2016-32-13 VALEX 2016-32-06
36 E1 (36 UNI) 60,00 130,00 100,00 36,26 VALEX 2016-32-13 VALEX 2016-32-06
40 E1 (S41-R14) 67,00 138,00 125,00 40,95 VALEX 2016-32-13 VALEX 2016-32-06
46 E4 (46 UNI) 65,00 145,00 135,00 46,90 VALEX 2016-32-13 VALEX 2016-32-06
49 E1 (S 49) 67,00 149,00 125,00 49,39 VALEX 2016-32-13 VALEX 2016-32-06
50 ES (50 UNI) 67,00 148,00 135,00 49,90 VALEX 2016-32-13 VALEX 2016-32-06
54 E1 (UIC 54) 70,00 159,00 140,00 54,77 VALEX 2016-32-13 VALEX 2016-32-06
60 E1 (UIC 60) 72,00 172,00 150,00 60,21 VALEX 2016-32-10

GENERAL INSTRUCTIONS
The selection of the fastening system, either for crane, train, or light (Decauville) rails, is a critically important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:

  • Slow down or shut down of the production process
  • Excessive and, or irregular wear of the rails
  • Damage of the mechanical components of the crane
  • Damage of the supporting base
  • Damage of the fastening systems

Valex fastening systems were developed through experience accumulated over more than 100 years of activity.
Valex fastening systems offer a wide range of alternatives, which would perform in the most effective and efficient way in every possible situation.

INSTALLATION INSTRUCTIONS

  • Carefully align the rails
  • Place the clips in direct contact with the rails.
  • Position the washer and insert the screw.
  • Perform an initial light tightening.
  • Complete the tightening process according to recommended torque.

TECHNICAL SPECIFICATIONS

  • Side load 55 KN
  • Lateral adjustment 10 mm
  • Torque tightening 175 Nm
  • Bolt 8.8 gr M16 – NOT INCLUDED
  • Steel quality S355JR

FIXING DETAILS

VALENTE S.p.A. aims to provide maximum assistance and total customer satisfaction, guarantees the origin and quality of its products, and supplies any reasonably requested documentation.

VALENTE S.p.A. reserves the right to modify the information contained in the technical data sheet without notice and disclaims any responsibility for any inaccuracies or changes in the reported data.