VALEX 4021

VALEX 4021
Clip Valex 4021

Download Data Sheet

valex-4021

FEATURES

  • System made up of one clip one bolt and nut.
  • Possibility of lateral adjustment.
  • Easy and simple installation.
  • Easy and simple maintenance.

COMPONENTS

  • CLIP
valex 4021

APPLICATIONS
VALEX 4021  is a direct fastening system specifically developed for crane rails, however, it can also be used for train and light (Decauville) rails, with very positive results.
A very rugged, reliable system of contained dimensions, which can be used with every type of crane, independently of the driving system.

Clip Valex 4021
Dimensions [mm] E F G H L L1 L2 M N O P Weight [g]
VALEX 4021 21 50 23 35 22,5 55 85 70 670

Valex fastening systems can also be used for several other rail profiles, not listed.
A complete range of compatible rails is available on request.

VALEX 1004
RAIL TYPE A [mm] B [mm] C [mm] Weight [Kg/m] WITH PAD WITHOUT PAD
A 45 45,00 55,00 125,00 22,10 VALEX 4021
A 55 55,00 65,00 150,00 31,80 VALEX 4021
A 65 65,00 75,00 175,00 43,10 VALEX 4021
A 75 75,00 85,00 200,00 56,20 VALEX 4021
A 100 100,00 95,00 200,00 74,30
A 120 120,00 105,00 220,00 100,00
A 150 150,00 150,00 220,00 150,30
CR 104 63,50 127,00 127,00 51,59
CR 105 65,10 131,80 131,80 52,09
CR 135 76,20 146,00 131,80 66,97
CR 171 101,60 152,40 152,40 84,83
MRS 87 A 101,60 152,40 152,40 86,80
CR 175 102,40 152,40 152,40 86,80
MRS 125 120,00 180,00 180,00 125,00
S 7 25,00 65,00 50,00 6,75
S 10 32,00 70,00 58,00 10,00
S 14 38,00 80,00 70,00 14,00
S 18 43,00 93,00 82,00 18,30
S 20 44,00 100,00 82,00 19,80
S 24 53,00 115,00 90,00 24,43 VALEX 4021
25 Kg/m 50,00 115,00 90,00 25,00 VALEX 4021
S 26 (AFNOR 26) 50,00 110,00 100,00 26,27 VALEX 4021
27 E1 (27 UNI) 50,00 120,00 95,00 27,06 VALEX 4021
AFNOR 30 56,00 125,50 106,00 29,98 VALEX 4021
30 E1 (S 30) 60,30 108,00 108,00 30,13 VALEX 4021
33 E1 (S 33) 58,00 134,00 105,00 33,47 VALEX 4021
36 E1 (36 UNI) 60,00 130,00 100,00 36,26
40 E1 (S41-R14) 67,00 138,00 125,00 40,95 VALEX 4021
46 E4 (46 UNI) 65,00 145,00 135,00 46,90
49 E1 (S 49) 67,00 149,00 125,00 49,39
50 ES (50 UNI) 67,00 148,00 135,00 49,90 VALEX 4021
54 E1 (UIC 54) 70,00 159,00 140,00 54,77 VALEX 4021
60 E1 (UIC 60) 72,00 172,00 150,00 60,21

GENERAL INSTRUCTIONS
The selection of the fastening system, either for crane, train, or light (Decauville) rails, is a critically important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:

  • Slow down or shut down of the production process
  • Excessive and, or irregular wear of the rails
  • Damage of the mechanical components of the crane
  • Damage of the supporting base
  • Damage of the fastening systems

Valex fastening systems were developed through experience accumulated over more than 100 years of activity.
Valex fastening systems offer a wide range of alternatives, which would perform in the most effective and efficient way in every possible situation.

INSTALLATION INSTRUCTIONS

  • Carefully align the rails.
  • Place the clips in direct contact with the rails.
  • Position the washer and insert the screw.
  • Perform an initial light tightening.
  • Complete the tightening process according to recommended torque.

TECHNICAL SPECIFICATIONS

  • Side load 70 KN
  • Lateral adjustament 8 mm
  • Torque tightening 320 Nm
  •  Bolt 8.8 gr M20 – NOT INCLUDED
  •  Steel quality S275JR

FIXING DETAILS

VALENTE S.p.A. aims to provide maximum assistance and total customer satisfaction, guarantees the origin and quality of its products, and supplies any reasonably requested documentation.

VALENTE S.p.A. reserves the right to modify the information contained in the technical data sheet without notice and disclaims any responsibility for any inaccuracies or changes in the reported data.