VALEX F036
Download Data Sheet
VALEX-F036
FEATURES
• Fastening system for rails with or without pad.
• System made up of two interlocked elements, which allow easy clip lateral adjustment.
• System components locked together by bolt M22.
• System lower element easily weldable to rail support.
COMPONENT PROVIDED
• Clip
APPLICATIONS
Developed for transport rails, VALEX F036 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.
GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.
VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.
ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening
TECHNICAL SPECIFICATIONS F036 – 20
• Side load 50 kN
• Torque tightening 220 Nm
• Bolt M18 8.8 gr – NOT INCLUDED
• Steel quality S275JR
TECHNICAL SPECIFICATIONS F036 – 23
• Side load 70 kN
• Torque tightening 320 Nm
• Bolt M20 8.8 gr – NOT INCLUDED
• Steel quality S275JR
TECHNICAL SPECIFICATIONS F036 – 25
• Side load 80 kN
• Torque tightening 550 Nm
• Bolt M24 8.8 gr – NOT INCLUDED
• Steel quality S275JR
WELDING DETAILS
System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.