VALEX D718-D718M
Download Data Sheet
VALEX-D718_D718M
FEATURES
• System made up of one clip.
• Easy and simple installation.
• Easy and simple manutenance.
COMPONENT PROVIDED
• VALEX D 718
• VALEX D 718M
Developed for Decauville rails, VALEX D and D718 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.
| Dimensions [mm] | E | F | G | H | L | L1 | L2 | M | N | O | P | Weight [g] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VALEX D718 | 7 | 16 | 40 | - | 18 | - | - | 12 | 35 | 55 | 44 | 190 |
| VALEX D718-M | - | 16 | 40 | - | 18 | - | - | 12 | 35 | 55 | 44 | 180 |
| Rail Type | A [mm] | B [mm] | C [mm] | Weight [kg/m] | Without Pad | With Pad |
|---|---|---|---|---|---|---|
| A 45 | 45 | 55 | 125 | 22,1 | VALEX D718/M | - |
| A 55 | 55 | 65 | 150 | 31,8 | - | - |
| A 65 | 65 | 75 | 175 | 43,1 | - | - |
| A 75 | 75 | 85 | 200 | 56,2 | - | - |
| A 100 | 100 | 95 | 200 | 74,3 | - | - |
| A 120 | 120 | 105 | 220 | 100 | - | - |
| A 150 | 150 | 150 | 220 | 150,3 | - | - |
| CR 104 | 63,5 | 127 | 127 | 51,59 | - | - |
| CR 105 | 65,1 | 131,8 | 131,8 | 52,09 | - | - |
| CR 135 | 76,2 | 146 | 131,8 | 66,97 | - | - |
| CR 171 | 101,6 | 152,4 | 152,4 | 84,83 | - | - |
| MRS 87 A | 101,6 | 152,4 | 152,4 | 86,8 | - | - |
| CR 175 | 102,4 | 152,4 | 152,4 | 86,8 | - | - |
| MRS 125 | 120 | 180 | 180 | 125 | - | - |
| S 7 | 25 | 65 | 50 | 6,75 | - | - |
| S 10 | 32 | 70 | 58 | 10 | - | - |
| S 14 | 38 | 80 | 70 | 14 | VALEX D718/M | - |
| S 18 | 43 | 93 | 82 | 18,3 | VALEX D718/M | - |
| S 20 | 44 | 100 | 82 | 19,8 | VALEX D718/M | - |
| S 24 | 53 | 115 | 90 | 24,43 | VALEX D718/M | - |
| 25 kg/m | 50 | 115 | 90 | 25 | VALEX D718/M | - |
| S 26 (AFNOR 26) | 50 | 110 | 100 | 26,27 | - | - |
| 27 E1 (27 UNI) | 50 | 120 | 95 | 27,06 | - | - |
| AFNOR 30 | 56 | 125,5 | 106 | 29,98 | - | - |
| 30 E1 (S 30) | 60,3 | 108 | 108 | 30,13 | VALEX D718/M | - |
| 33 E1 (S 33) | 58 | 134 | 105 | 33,47 | - | - |
| 36 E1 (36 UNI) | 60 | 130 | 100 | 36,26 | - | - |
| 40 E1 (S 41-R14) | 67 | 138 | 125 | 40,95 | - | - |
| 46 E4 (46 UNI) | 65 | 145 | 135 | 46,9 | - | - |
| 49 E1 (S 49) | 67 | 149 | 125 | 49,39 | - | - |
| 50 E5 (50 UNI) | 67 | 148 | 135 | 49,9 | - | - |
| 54 E1 (UIC 54) | 70 | 159 | 140 | 54,77 | - | - |
| 60 E1 (UIC 60) | 72 | 172 | 150 | 60,21 | - | - |
GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.
VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.
ASSEMBLY INSTRUCTIONS
• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening
TECHNICAL SPECIFICATIONS D820
• Side load 60 kN
• Torque tightening 175 Nm
• Bolt M16 8.8 gr – NOT INCLUDED
• Steel quality S275JR
TECHNICAL SPECIFICATIONS D820M
• Side load 55 kN
• Torque tightening 175 Nm
• Bolt M 16 8.8 gr – NOT INCLUDED
• Steel quality S275JR
FIXING DETAILS
System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.