VALEX D510-D510M
Download Data Sheet
VALEX-D510_D510M
FEATURES
• System made up of one clip.
• Easy and simple installation.
• Easy and simple manutenance.
COMPONENT PROVIDED
• VALEX D510
• VALEX D510M
Developed for Decauville rails, VALEX D510 and D510M direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system
| Dimensions [mm] | E | F | G | H | L | L1 | L2 | M | N | O | P | Weight [g] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VALEX D510 | 5 | 12 | 30 | - | 15 | - | - | 9 | 29 | 40 | 40 | 70 |
| VALEX D510-M | - | 12 | 30 | - | 15 | - | - | 9 | 29 | 40 | 40 | 70 |
| Rail Type | A [mm] | B [mm] | C [mm] | Weight [kg/m] | Without Pad | With Pad |
|---|---|---|---|---|---|---|
| A 45 | 45 | 55 | 125 | 22,1 | VALEX D510/M | - |
| A 55 | 55 | 65 | 150 | 31,8 | - | - |
| A 65 | 65 | 75 | 175 | 43,1 | - | - |
| A 75 | 75 | 85 | 200 | 56,2 | - | - |
| A 100 | 100 | 95 | 200 | 74,3 | - | - |
| A 120 | 120 | 105 | 220 | 100 | - | - |
| A 150 | 150 | 150 | 220 | 150,3 | - | - |
| CR 104 | 63,5 | 127 | 127 | 51,59 | - | - |
| CR 105 | 65,1 | 131,8 | 131,8 | 52,09 | - | - |
| CR 135 | 76,2 | 146 | 131,8 | 66,97 | - | - |
| CR 171 | 101,6 | 152,4 | 152,4 | 84,83 | - | - |
| MRS 87 A | 101,6 | 152,4 | 152,4 | 86,8 | - | - |
| CR 175 | 102,4 | 152,4 | 152,4 | 86,8 | - | - |
| MRS 125 | 120 | 180 | 180 | 125 | - | - |
| S 7 | 25 | 65 | 50 | 6,75 | - | - |
| S 10 | 32 | 70 | 58 | 10 | VALEX D510/M | - |
| S 14 | 38 | 80 | 70 | 14 | VALEX D510/M | - |
| S 18 | 43 | 93 | 82 | 18,3 | VALEX D510/M | - |
| S 20 | 44 | 100 | 82 | 19,8 | VALEX D510/M | - |
| S 24 | 53 | 115 | 90 | 24,43 | VALEX D510/M | - |
| 25 kg/m | 50 | 115 | 90 | 25 | VALEX D510/M | - |
| S 26 (AFNOR 26) | 50 | 110 | 100 | 26,27 | VALEX D510/M | - |
| 27 E1 (27 UNI) | 50 | 120 | 95 | 27,06 | VALEX D510/M | - |
| AFNOR 30 | 56 | 125,5 | 106 | 29,98 | VALEX D510/M | - |
| 30 E1 (S 30) | 60,3 | 108 | 108 | 30,13 | VALEX D510/M | - |
| 33 E1 (S 33) | 58 | 134 | 105 | 33,47 | - | - |
| 36 E1 (36 UNI) | 60 | 130 | 100 | 36,26 | - | - |
| 40 E1 (S 41-R14) | 67 | 138 | 125 | 40,95 | - | - |
| 46 E4 (46 UNI) | 65 | 145 | 135 | 46,9 | - | - |
| 49 E1 (S 49) | 67 | 149 | 125 | 49,39 | - | - |
| 50 E5 (50 UNI) | 67 | 148 | 135 | 49,9 | - | - |
| 54 E1 (UIC 54) | 70 | 159 | 140 | 54,77 | - | - |
| 60 E1 (UIC 60) | 72 | 172 | 150 | 60,21 | - | - |
GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.
VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation
ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening
TECHNICAL SPECIFICATIONS D510
• Side load 20 kN
• Torque tightening 75Nm
• Bolt M(vedi tabella) 8.8 gr – NOT INCLUDED
• Steel quality S275JR
TECHNICAL SPECIFICATIONS D510N
• Side load 18kN
• Torque tightening75 Nm
• Bolt M128.8 gr – NOT INCLUDED
• Steel quality S275JR
System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.