Download Data Sheet
VALEX-6024
FEATURES
• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing.
COMPONENTS PROVIDED
• Clip with vulcanized rubber nose.
• Special washer

APPLICATIONS
Developed for crane rails, VALEX 6024 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Dimensions [mm] | E | F | G | H | L | L1 | L2 | M | N | O | P | Weight [g] |
---|---|---|---|---|---|---|---|---|---|---|---|---|
VALEX 6024-50-21 | - | - | - | 18 | - | - | - | - | - | - | - | 1690 |
VALEX 6024-50-27 | - | - | - | 12 | - | - | - | - | - | - | - | 1670 |
Rail Type | A [mm] | B [mm] | C [mm] | Weight [kg/m] | Without Pad | With Pad |
---|---|---|---|---|---|---|
A 45 | 45 | 55 | 125 | 22,1 | - | - |
A 55 | 55 | 65 | 150 | 31,8 | - | - |
A 65 | 65 | 75 | 175 | 43,1 | - | - |
A 75 | 75 | 85 | 200 | 56,2 | - | - |
A 100 | 100 | 95 | 200 | 74,3 | - | - |
A 120 | 120 | 105 | 220 | 100 | - | - |
A 150 | 150 | 150 | 220 | 150,3 | - | VALEX 6024-50-21 |
CR 104 | 63,5 | 127 | 127 | 51,59 | - | VALEX 6024-50-21 |
CR 105 | 65,1 | 131,8 | 131,8 | 52,09 | - | - |
CR 135 | 76,2 | 146 | 131,8 | 66,97 | - | VALEX 6024-50-21 |
CR 171 | 101,6 | 152,4 | 152,4 | 84,83 | - | VALEX 6024-50-21 |
MRS 87 A | 101,6 | 152,4 | 152,4 | 86,8 | - | VALEX 6024-50-21 |
CR 175 | 102,4 | 152,4 | 152,4 | 86,8 | - | VALEX 6024-50-21 |
MRS 125 | 120 | 180 | 180 | 125 | VALEX 6024-50-21 | VALEX 6024-50-27 |
S 7 | 25 | 65 | 50 | 6,75 | - | - |
S 10 | 32 | 70 | 58 | 10 | - | - |
S 14 | 38 | 80 | 70 | 14 | - | - |
S 18 | 43 | 93 | 82 | 18,3 | - | - |
S 20 | 44 | 100 | 82 | 19,8 | - | - |
S 24 | 53 | 115 | 90 | 24,43 | - | - |
25 kg/m | 50 | 115 | 90 | 25 | - | - |
S 26 (AFNOR 26) | 50 | 110 | 100 | 26,27 | - | - |
27 E1 (27 UNI) | 50 | 120 | 95 | 27,06 | - | - |
AFNOR 30 | 56 | 125,5 | 106 | 29,98 | - | - |
30 E1 (S 30) | 60,3 | 108 | 108 | 30,13 | - | - |
33 E1 (S 33) | 58 | 134 | 105 | 33,47 | - | - |
36 E1 (36 UNI) | 60 | 130 | 100 | 36,26 | - | - |
40 E1 (S 41-R14) | 67 | 138 | 125 | 40,95 | - | - |
46 E4 (46 UNI) | 65 | 145 | 135 | 46,9 | - | - |
49 E1 (S 49) | 67 | 149 | 125 | 49,39 | - | - |
50 E5 (50 UNI) | 67 | 148 | 135 | 49,9 | - | - |
54 E1 (UIC 54) | 70 | 159 | 140 | 54,77 | - | - |
60 E1 (UIC 60) | 72 | 172 | 150 | 60,21 | - | - |
GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.
VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.
ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screws and special washers.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening
TECHNICAL SPECIFICATIONS
• Lateral adjustment 15 mm
• Side load 165 kN
• Torque tightening 550Nm
• Bolt M24 8.8 gr – NOT INCLUDED
• Steel quality S355JR
WELDING DETAILS


System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice