VALEX 4018

Clip Valex 4018
Clip Valex 4018

Download Data Sheet


• System made up of one clip and bolt.
• Possibility of lateral adjustment.
• Easy and simple installation.
• Easy and simple manuntenance.


Developed for crane rails, VALEX 4018 indirect fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Clip Valex 4018
Attention: The internal data of table “69” is corrupted!
Attention: The internal data of table “63” is corrupted!

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening
• Lateral adjustament 6 mm.
• Side load 60 [kN] • Torque tightening 220 [Nm] • Bolt M18 8.8 gr – NOT INCLUDED
• Steel quality S275JR


System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.