VALEX-2016
FEATURES
• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing.
COMPONENTS PROVIDED
• Clip with vulcanized rubber nose.
• Special washer

APPLICATIONS
Developed for crane rails, VALEX 2016 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system
VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.
ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screw and special washer.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening
TECHNICAL SPECIFICATIONS
• Lateral adjustment 10 mm
• Side load 55 kN
• Torque tightening 175 Nm
• Bolt M16 8.8 gr – NOT INCLUDED
• Steel quality S355JR

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.