VALEX D718-D718M

Clip Valex D718-D718M
Clip Valex D718-D718M

Download Data Sheet


• System made up of one clip.
• Easy and simple installation.
• Easy and simple manutenance.

• VALEX D 718
• VALEX D 718M

Developed for Decauville rails, VALEX D and D718 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.
Clip Valex D718-D718M
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX D71871640-18--12355544190
VALEX D718-M-1640-18--12355544180
Rail TypeA [mm] B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX D718/M-
A 55556515031,8--
A 65657517543,1--
A 75758520056,2--
A 1001009520074,3--
A 120120105220100--
A 150150150220150,3--
CR 10463,512712751,59--
CR 10565,1131,8131,852,09--
CR 13576,2146131,866,97--
CR 171101,6152,4152,484,83--
MRS 87 A101,6152,4152,486,8--
CR 175102,4152,4152,486,8--
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014VALEX D718/M-
S 1843938218,3VALEX D718/M-
S 20441008219,8VALEX D718/M-
S 24531159024,43VALEX D718/M-
25 kg/m501159025VALEX D718/M-
S 26 (AFNOR 26)5011010026,27--
27 E1 (27 UNI)501209527,06--
AFNOR 3056125,510629,98--
30 E1 (S 30)60,310810830,13VALEX D718/M-
33 E1 (S 33)5813410533,47--
36 E1 (36 UNI)6013010036,26--
40 E1 (S 41-R14)6713812540,95--
46 E4 (46 UNI)6514513546,9--
49 E1 (S 49)6714912549,39--
50 E5 (50 UNI)6714813549,9--
54 E1 (UIC 54)7015914054,77--
60 E1 (UIC 60)7217215060,21--


The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.


• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening

• Side load 60 kN
• Torque tightening 175 Nm
• Bolt M16 8.8 gr – NOT INCLUDED
• Steel quality S275JR

• Side load 55 kN
• Torque tightening 175 Nm
• Bolt M 16 8.8 gr – NOT INCLUDED
• Steel quality S275JR


System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.