VALEX 3016

Clip Valex 3016
Clip Valex 3016

Download Data Sheet


• Fastening system for rails with or without pad.
• System made up of two interlocked elements, which allow easy clip lateral adjustment.
• System components locked together by bolt and flanged nut.
• System lower element easily weldable to rail support.
• Flanged nuts M 16
• Upper clip with steel nose.
• Special screws M 16
• Weldable lower clip

VALEX 3016
Developed for crane rails, VALEX 3016 indirect fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.
Clip Valex 3016
Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 3016-28-9---9-------670
VALEX 3016-28-12---12-------680
VALEX 3016-28-15---15-------680
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX 3016-28-15VALEX 3016-28-09
A 55556515031,8VALEX 3016-28-15-
A 65657517543,1VALEX 3016-28-12-
A 75758520056,2VALEX 3016-28-12-
A 1001009520074,3VALEX 3016-28-12-
A 120120105220100VALEX 3016-28-09-
A 150150150220150,3--
CR 10463,512712751,59VALEX 3016-28-09-
CR 10565,1131,8131,852,09VALEX 3016-28-12-
CR 13576,2146131,866,97VALEX 3016-28-09-
CR 171101,6152,4152,484,83--
MRS 87 A101,6152,4152,486,8--
CR 175102,4152,4152,486,8VALEX 3016-28-09-
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014VALEX 3016-28-15VALEX 3016-28-09
S 1843938218,3VALEX 3016-28-15VALEX 3016-28-09
S 20441008219,8VALEX 3016-28-15VALEX 3016-28-09
S 24531159024,43VALEX 3016-28-15VALEX 3016-28-09
25 kg/m501159025VALEX 3016-28-15VALEX 3016-28-09
S 26 (AFNOR 26)5011010026,27VALEX 3016-28-15VALEX 3016-28-09
27 E1 (27 UNI)501209527,06VALEX 3016-28-15VALEX 3016-28-09
AFNOR 3056125,510629,98VALEX 3016-28-15VALEX 3016-28-09
30 E1 (S 30)60,310810830,13VALEX 3016-28-15VALEX 3016-28-09
33 E1 (S 33)5813410533,47VALEX 3016-28-12-
36 E1 (36 UNI)6013010036,26VALEX 3016-28-12-
40 E1 (S 41-R14)6713812540,95VALEX 3016-28-12-
46 E4 (46 UNI)6514513546,9VALEX 3016-28-12-
49 E1 (S 49)6714912549,39VALEX 3016-28-12-
50 E5 (50 UNI)6714813549,9VALEX 3016-28-12-
54 E1 (UIC 54)7015914054,77VALEX 3016-28-12-
60 E1 (UIC 60)7217215060,21VALEX 3016-28-09-

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity

VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation..

• Place the lower clip facing the rail according to the drawing at the distance indicated in the technical card.
• Weld the two perpendicular sides and the diagonal side of the lower clip opposite to the rail with either electrode or rode.
• Insert the screw in the lower clip.
• Place upper clip and the flanged nut.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening

• AWS A5.1-04 E7018-1
• EN ISO 2560-A E42 4 B42 H5
• CE EN 13479

• AWS A5.18 ER 705-6: SG3
• EN ISO 1668 W 4Si1: SG3

• Side load 65 kN
• Torque tightening 175 Nm
• Welding seam thickness 10 mm (see technical drawing below)
• Bolt M16 8.8 gr
• Steel quality S355JR


VALEX 3016
VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.