VALEX 2020

clip Valex 2020
clip Valex 2020

Download Data Sheet


• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing.

1 Special washer
2 Clip with vulcanized rubber nose.


Developed for crane rails, VALEX 2020 indirect fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 2020-35-8---17-------750
VALEX 2020-35-13---12-------740
VALEX 2020-35-15---10-------740
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1-VALEX 2020-35-13
A 55556515031,8-VALEX 2020-35-13
A 65657517543,1VALEX 2020-35-08VALEX 2020-35-13
A 75758520056,2VALEX 2020-35-08VALEX 2020-35-13
A 1001009520074,3VALEX 2020-35-08VALEX 2020-35-15
A 120120105220100VALEX 2020-35-13-
A 150150150220150,3VALEX 2020-35-13-
CR 10463,512712751,59VALEX 2020-35-13-
CR 10565,1131,8131,852,09VALEX 2020-35-08VALEX 2020-35-15
CR 13576,2146131,866,97VALEX 2020-35-13-
CR 171101,6152,4152,484,83VALEX 2020-35-15-
MRS 87 A101,6152,4152,486,8VALEX 2020-35-15-
CR 175102,4152,4152,486,8VALEX 2020-35-13-
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014--
S 1843938218,3-VALEX 2020-35-13
S 20441008219,8-VALEX 2020-35-13
S 24531159024,43-VALEX 2020-35-13
25 kg/m501159025-VALEX 2020-35-13
S 26 (AFNOR 26)5011010026,27-VALEX 2020-35-13
27 E1 (27 UNI)501209527,06-VALEX 2020-35-13
AFNOR 3056125,510629,98-VALEX 2020-35-13
30 E1 (S 30)60,310810830,13VALEX 2020-35-08VALEX 2020-35-13
33 E1 (S 33)5813410533,47VALEX 2020-35-08VALEX 2020-35-13
36 E1 (36 UNI)6013010036,26VALEX 2020-35-08VALEX 2020-35-15
40 E1 (S 41-R14)6713812540,95VALEX 2020-35-08VALEX 2020-35-13
46 E4 (46 UNI)6514513546,9VALEX 2020-35-08VALEX 2020-35-15
49 E1 (S 49)6714912549,39VALEX 2020-35-08VALEX 2020-35-15
50 E5 (50 UNI)6714813549,9VALEX 2020-35-08VALEX 2020-35-13
54 E1 (UIC 54)7015914054,77VALEX 2020-35-08VALEX 2020-35-15
60 E1 (UIC 60)7217215060,21VALEX 2020-35-08VALEX 2020-35-15

The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity
VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screw and special washer.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening
• Lateral adjustment 15 mm
• Side load 110 kN
• Torque tightening 320 Nm
• Bolt M20 8.8 gr – NOT INCLUDED
• Steel quality S355JR


VALEX 1004

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.