Project Description

VALEX 4021

Download Data Sheet

VALEX-4021

FEATURES
• System made up of one clip and bolt.
• Possibility of lateral adjustment.
• Easy and simple installation.
• Easy and simple manuntenance.

COMPONENT PROVIDED
• Clip

APPLICATIONS
Developed for crane rails, VALEX 4021 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 4021-2150--233522,5558570670
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1VALEX 4021-
A 55556515031,8VALEX 4021-
A 65657517543,1VALEX 4021-
A 75758520056,2VALEX 4021-
A 1001009520074,3--
A 120120105220100--
A 150150150220150,3--
CR 10463,512712751,59--
CR 10565,1131,8131,852,09--
CR 13576,2146131,866,97--
CR 171101,6152,4152,484,83--
MRS 87 A101,6152,4152,486,8--
CR 175102,4152,4152,486,8--
MRS 125120180180125--
S 72565506,75--
S 1032705810--
S 1438807014--
S 1843938218,3--
S 20441008219,8--
S 24531159024,43VALEX 4021-
25 kg/m501159025VALEX 4021-
S 26 (AFNOR 26)5011010026,27VALEX 4021-
27 E1 (27 UNI)501209527,06VALEX 4021-
AFNOR 3056125,510629,98VALEX 4021-
30 E1 (S 30)60,310810830,13VALEX 4021-
33 E1 (S 33)5813410533,47VALEX 4021-
36 E1 (36 UNI)6013010036,26--
40 E1 (S 41-R14)6713812540,95VALEX 4021-
46 E4 (46 UNI)6514513546,9--
49 E1 (S 49)6714912549,39--
50 E5 (50 UNI)6714813549,9VALEX 4021-
54 E1 (UIC 54)7015914054,77VALEX 4021-
60 E1 (UIC 60)7217215060,21--

GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system.

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity.

VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to drawing at the distance indicated in the technical card.
• Insert screw.
• Proceed to a light tightening.
• Control line up of rail.
• Complete tightening

TECHNICAL SPECIFICATIONS
• Lateral adjustament8 mm.
• Side load 70 [kN] • Torque tightening 320 [Nm] • Bolt M20 8.8 gr – NOT INCLUDED
• Steel quality S275JR

WELDING DETAILS

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.