Project Description

VALEX 2124

Download Data Sheet

VALEX-2124

FEATURES
• Elastic fastening system for rails with or without pad.
• Elastomer nose increases rail-support structure tolerances, reduces connections stress, allows better rail fixing

COMPONENTS PROVIDED
• Clip with vulcanized rubber nose.
• Special washers.

APPLICATIONS
Developed for crane rails, VALEX 2124 direct fastening system is used, with excellent results, also with train and light rails. A very rugged, reliable, contained dimensions fastening system, used with any type of crane independently of driving system.

Dimensions [mm]EFGHLL1L2MNOPWeight [g]
VALEX 2124-42-9---23-------2020
VALEX 2124-42-13---19-------2010
VALEX 2124-42-18---14-------1990
VALEX 2124-42-23---9-------1970
Rail TypeA [mm]B [mm]C [mm]Weight [kg/m]Without PadWith Pad
A 45455512522,1--
A 55556515031,8--
A 65657517543,1-VALEX 2124-42-13
A 75758520056,2VALEX 2124-42-09VALEX 2124-42-13
A 1001009520074,3VALEX 2124-42-09VALEX 2124-42-13
A 120120105220100VALEX 2124-42-09VALEX 2124-42-18
A 150150150220150,3VALEX 2124-42-13VALEX 2124-42-18
CR 10463,512712751,59VALEX 2124-42-13VALEX 2124-42-18
CR 10565,1131,8131,852,09VALEX 2124-42-09VALEX 2124-42-13
CR 13576,2146131,866,97VALEX 2124-42-09VALEX 2124-42-18
CR 171101,6152,4152,484,83VALEX 2124-42-13VALEX 2124-42-18
MRS 87 A101,6152,4152,486,8VALEX 2124-42-13VALEX 2124-42-18
CR 175102,4152,4152,486,8VALEX 2124-42-09VALEX 2124-42-18
MRS 125120180180125VALEX 2124-42-18-
S 72565506,75--
S 1032705810--
S 1438807014--
S 1843938218,3-VALEX 2124-42-09
S 20441008219,8-VALEX 2124-42-13
S 24531159024,43-VALEX 2124-42-13
25 kg/m501159025-VALEX 2124-42-09
S 26 (AFNOR 26)5011010026,27-VALEX 2124-42-09
27 E1 (27 UNI)501209527,06-VALEX 2124-42-09
AFNOR 3056125,510629,98-VALEX 2124-42-13
30 E1 (S 30)60,310810830,13-VALEX 2124-42-09
33 E1 (S 33)5813410533,47-VALEX 2124-42-13
36 E1 (36 UNI)6013010036,26-VALEX 2124-42-13
40 E1 (S 41-R14)6713812540,95-VALEX 2124-42-13
46 E4 (46 UNI)6514513546,9VALEX 2124-42-09VALEX 2124-42-13
49 E1 (S 49)6714912549,39VALEX 2124-42-09VALEX 2124-42-13
50 E5 (50 UNI)6714813549,9-VALEX 2124-42-13
54 E1 (UIC 54)7015914054,77VALEX 2124-42-09VALEX 2124-42-13
60 E1 (UIC 60)7217215060,21VALEX 2124-42-09VALEX 2124-42-13

GENERAL INSTRUCTIONS
The selection of a fastening system is a critical, important decision both when placing a track or a single rail. The wrong selection could have expensive consequences and create serious problems such as:
• Slow down or shut down of the production process.
• Excessive and, or irregular wear of rails.
• Damage of mechanical components of crane.
• Damage to supporting base.
• Damage to fastening system

VALEX fastening systems have been developed building on the experience accumulated over more than 100 years of activity

VALENTE fastening systems offer an unlimited selection of alternatives, which perform in the most effective and efficient way in every situation.

ASSEMBLING INSTRUCTIONS
• Place clip facing the rail according to the drawing at the distance indicated in the technical card.
• Insert screws and special washers.
• Proceed to a light tightening.
• Control line up of the rail.
• Complete tightening

TECHNICAL SPECIFICATIONS
• Lateral adjustment 15 mm
• Side load 290 kN
• Torque tightening 550 Nm
• Bolt M24 8.8 gr – NOT INCLUDED
• Steel quality S355JR

WELDING DETAILS

System can be used with more rail types than those listed, complete range of the usable rails available on request.
Products and specifications are subject to change without previous notice.